How to Polish an Axe

Introduction An axe is a versatile tool that can be used for a variety of tasks such as chopping wood, clearing brush, and even survival situations. However, it is important to maintain and properly care for your axe to ensure its longevity and safety while in use. In this article, we will go over the steps on how to polish an axe and the tools and materials needed to do so.

Preparing the Axe

The first step in polishing an axe is to prepare it for the process. This includes removing any rust and debris that may be present on the blade and handle. You can do this by using a wire brush or steel wool to scrub away the rust. If the rust is particularly stubborn, you can use a rust remover solution to help break it down.

Once the rust has been removed, it is time to sharpen the blade. A dull axe can not only be ineffective, but also dangerous. To sharpen the blade, you can use a file or a sharpening stone. Start by holding the blade at a 20-degree angle and work your way across the entire blade, making sure to keep the angle consistent. Once you have completed one side, repeat the process on the other side.

Next, you will want to sand the handle of the axe. This will help to smooth out any rough spots and remove any debris that may have accumulated over time. You can use a piece of sandpaper or a sanding sponge to do this. Be sure to sand the handle evenly to maintain its balance.

Applying Oil or Wax

Once the axe is clean, sharp, and smooth, it is time to apply oil or wax to protect and preserve the metal and wood. There are a variety of oils and waxes that can be used, such as linseed oil, tung oil, or beeswax.

To apply the oil or wax, start by heating it up slightly to make it easier to spread. Then, use a cloth or brush to apply it to the blade and handle. Be sure to cover the entire surface and pay special attention to any nooks and crannies where debris may accumulate.

Allow the oil or wax to dry completely before using the axe again. This will not only protect the metal and wood from rust, but also help to keep the axe in good condition for a longer period of time.

Frequently Asked Questions

  1. What tools and materials do I need to polish an axe? You will need a wire brush or steel wool, a rust remover solution (if necessary), a file or sharpening stone, sandpaper or a sanding sponge, oil or wax, and a clean cloth or brush.
  2. How do I remove rust from the blade and handle of an axe? You can use a wire brush or steel wool to scrub away rust from the blade and handle. If the rust is particularly stubborn, you can use a rust remover solution to help break it down. Be sure to remove all debris and rust from the blade and handle.
  3. How often should I polish my axe? It depends on how often you use the axe and in what conditions. If the axe is frequently exposed to damp or wet conditions, it should be polished more often to prevent rust. It’s recommended to check the condition of the axe and polish it as needed.
  4. What type of oil or wax should I use to protect and preserve my axe? Linseed oil, tung oil, or beeswax are commonly used to protect and preserve the metal and wood of an axe. It’s important to use a food-grade mineral oil if you plan to use the axe for food preparation.
  5. Do I need to use a rust remover solution if the rust is not very severe? It’s not necessary if the rust is not severe, but if you want to remove it for appearance reasons or to prevent it from spreading, you may use a rust remover solution.
  6. How do I know when the oil or wax has dried completely before using the axe again? It usually takes around 24 hours for oil or wax to dry completely. You can check the surface of the axe, if it feels dry and not tacky to the touch, it’s dry. Keep in mind that drying time may vary depending on the type of oil or wax used and the environment.

Conclusion

An axe is a valuable tool that can be used for a variety of tasks, but it is important to maintain and properly care for it to ensure its longevity and safety while in use. By following the steps outlined in this article, you will be able to properly polish your axe and keep it in top condition.

It is important to remind that in order to maintain the axe and ensure its longevity, it’s necessary to oil or wax it regularly, especially after using it in damp or wet conditions. Also, it’s important to keep the axe clean, sharp and well-balanced for safety reasons. By taking care of your axe, you’ll be able to enjoy its use for many years to come.

About the author 

Cory